A Little Wired...
Long time, no progress! I know, I know. As Joe said, "If you don't work on it, you'll never get it finished...it's not like you're going to hire anybody to do any of it!" Life has just been a little more hectic than normal... Saturday, we did get a little wiring done, and I think the Welder made a good journeyman for the day :) He nailed the electrical boxes to the stud boards.
Here he is securing the wire with a staple...not your ordinary staple. No stapler involved-these staples are hammered.
Dad drilled the holes for the wire's path.Jason used the cutting torch to make way for the wire in the areas that ran into iron.
Then Uncle Pete pulled the wire.
Here he is securing the wire with a staple...not your ordinary staple. No stapler involved-these staples are hammered.
Dad drilled the holes for the wire's path.Jason used the cutting torch to make way for the wire in the areas that ran into iron.
Then Uncle Pete pulled the wire.
Guess we are lucky to have electricians in our family...this is only half of them too! Really helps, since as usual, we have no plan and are figuring things out as we go along...not a good method if you are paying someone by the hour!
The Welding Wife had the important job of pulling the wire to keep it from getting hung on this corner.
And then winding up the cut wires to fit inside the boxes.
Comments
Post a Comment